Hello,
a month ago I got back to the hobby, so I decided to make a painting station.
Here's some drawings and toughs, it might help someone. Hope it does help in any way
Here's a 3D picture and a sketch of parts (and how they should be cut).
Here's a file from SketchUp 8 if someone needs:
http://www.sendspace.com/file/fbpor3First of all I was thinking what materials should I use. I decided to go with 0.5cm thick plywood. Since I couldn't find that thickness I bought 1.2cm, and it changed my plans a bit. After that I sketched up all the parts on wood and double checked measurements
Then I was about to cut the pieces, for that I used hand saw and for round parts drilling machine with add on for larger holes. Something like this
http://drill-bit-sets-tools.blogspot.com/2012/12/70mm-sharp-blade-hinge-boring-drill-bit.html After cutting all visible parts could be sanded with sanding paper. I did it because I wanted to get nice round edges.
All the parts were connected with regular PVA glue and left over night to tighten.
Hope this will help someone with future projects
I will post some pictures (with painted station and some changes I made during making process).
Cheers
P.S. sorry for measurements in "cm"
{ PORTAL }
Print view
Top
"