| The One Ring https://wap.one-ring.co.uk/ |
|
| Protecting miniatures https://wap.one-ring.co.uk/viewtopic.php?f=30&t=24545 |
Page 1 of 1 |
| Author: | Constantine [ Fri Dec 21, 2012 12:04 pm ] |
| Post subject: | Protecting miniatures |
I wanted to ask if there is a way to protect the miniatures' paint other than varnishing them. Mat varnish is too glossy and looks unnatural. Is there a way to preserve the paint without distorting the appearance of the miniatures? Is purity seal effective in reducing the gloss while simultaneously protecting the color? I just don't want all my hard work to go to waste 
|
|
| Author: | Galanur [ Fri Dec 21, 2012 12:22 pm ] |
| Post subject: | Re: Protecting miniatures |
get a non glowing varnish...purity seal normally works well, but if you wanna spare money or get s quality one, go to a paint store, normally the varnish use to protect the painting are normally the best ones, just remember, do not spray the miniature heavily, normally I give 1 click per facing(front and back) and very lightly to avoid the glowing and its enough to offer a good protection |
|
| Author: | SMORG [ Fri Dec 21, 2012 1:06 pm ] |
| Post subject: | Re: Protecting miniatures |
the seacret is to use it as little as possible, even the most matt varnish will turn to gloss if you overdo it |
|
| Author: | Constantine [ Fri Dec 21, 2012 1:24 pm ] |
| Post subject: | Re: Protecting miniatures |
I did use mat varnish before, but the gloss was obvious. Maybe my mistake was on the amount applied. I'll give it another shot with less varnish. Quote: I use rowney gloss painted on, then once dry i paint with testors dullcoat How is it working for you? Is the dullcoat aimilar to purity seal in function? |
|
| Author: | Constantine [ Sat Dec 22, 2012 9:57 am ] |
| Post subject: | Re: Protecting miniatures |
Quote: I tend to use 1 or 2 coats and now shine come through You mean no shine? Because I am a bit confused just to clarify things: 1)Matt Varnish does not protect the paint? 2)I need to use a gloss varnish and then dull it down? 3)Is the protection offered sufficient (at least from normal wear)? So far I had used both gloss and mat varnish. Neither had adequately protected the miniatures and both had left a glossing effect. |
|
| Author: | Constantine [ Sat Dec 22, 2012 11:57 am ] |
| Post subject: | Re: Protecting miniatures |
Thank you so much for your time and replies. I will be using both glosses as you suggested. Hopefully the wargaming stores I know of, stock the specific brand, since the company cannot deliver it to Greece due to customs' regulations. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|