I recently did the same thing. You can use brush on matt varnish.
| The One Ring https://wap.one-ring.co.uk/ |
|
| Varnish Problem https://wap.one-ring.co.uk/viewtopic.php?f=30&t=23289 |
Page 1 of 1 |
| Author: | johnny189 [ Sun Jun 24, 2012 10:25 am ] |
| Post subject: | Varnish Problem |
I recently used a spray gloss varish, then the vallejo spray matt varnish on some berserkers. This has ruined the models, making them have some whiteish bits all over them. I uderstand that this is sometimes a problem with spray matt varnish, they looked fine after the gloss varnish (but shiny). Does anyone know of a way to remove the shine of gloss varnish without the risks of using a matt spray (I followed all the rules for using it, shook it for 3 minuites but it still didn't work). I can't not gloss varnish them because matt varnish won't protect them well enough. Thanks |
|
| Author: | Oldman Willow [ Sun Jun 24, 2012 11:42 am ] |
| Post subject: | Re: Varnish Problem |
| I recently did the same thing. You can use brush on matt varnish.
|
|
| Author: | johnny189 [ Sun Jun 24, 2012 1:31 pm ] |
| Post subject: | Re: Varnish Problem |
Does brush on matt varnish ever cause any problems? Does it actually take of the shine? I have some brush on humbrol dule cote and it only makes things shinier. |
|
| Author: | johnny189 [ Sun Jun 24, 2012 4:29 pm ] |
| Post subject: | Re: Varnish Problem |
Quendil wrote: I now never use spray paint for this problem. I even use brush on primers as I tend to find spray primers always miss some bit. I get my varnish from here http://www.antenocitisworkshop.com/warg ... rnish.html I use the Daler Gloss and the testors dullcote. I have never had a problem. Its takes longer but is worth it in the end. I also tend to leave at least 3 days but usually a week between glossing and then painting matt. I also use the vallejo white and black primers and brush them on. Does testors dullcote completely remove the shine without any problems? I've heard good things about it but didn't think it was sold in the UK anywhere. Thanks for the link. |
|
| Author: | SeveredHead [ Sun Jun 24, 2012 7:12 pm ] |
| Post subject: | Re: Varnish Problem |
Besides plenty of shaking and checking the humidity factor, I have had this problem before as well and ended up repainting loads of figures. I gave up and now just brush on Quick shade after painting and have learned to live with the shine. I have had better luck with Testor's dullcote than GW's Purity seal. Good luck. |
|
| Author: | Ukfreddybear [ Thu Jun 28, 2012 12:58 pm ] |
| Post subject: | Re: Varnish Problem |
I never use a spray. Vallejo Matt Varnish (brush on) is the best I have come across, but make sure the bottle is well shaken first. |
|
| Author: | Tobgoblin [ Fri Jun 29, 2012 9:47 pm ] |
| Post subject: | Re: Varnish Problem |
I've had that problem with a GW varnish spray and dang I was mad about it. Is it a dusty look on the models or is it white bigger chunks? When I got the white dusty look from the GW varnish I actually managed to salvage it with a better dullcote over it. I think I used testors but not sure. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|