| The One Ring https://wap.one-ring.co.uk/ |
|
| Painting Goblin Armour https://wap.one-ring.co.uk/viewtopic.php?f=30&t=19461 |
Page 1 of 1 |
| Author: | DeepThought [ Wed Sep 15, 2010 8:25 am ] |
| Post subject: | Painting Goblin Armour |
Hi im looking for some advice on painting moria goblin armour, I have tried a few methods but it always ends up looking to shiny for my tastes. Im trying for something like the 'Eavy Metal Team' shown on the back of the box. I have tried the combinations of boltgun metal and tin bitz but it always looks to metalic and shiny. I have tried black ink, chaos black wash and chaos black drybrush but to me none of them look right. If anyone can suggest something it would be much appreciated. |
|
| Author: | TheBucklandBrewer [ Wed Sep 15, 2010 10:51 am ] |
| Post subject: | Re: Painting Goblin Armour |
Hi, and welcome to the One-Ring  For dark or rusty armour of Orcs or Goblins, or any other evil brand of Middle-earthlings, I usually apply wash in the end with a 50/50-mix of black ink and scorched brown paint, well watered down this gives a nice 'rusty' look on the armour. The Scorched Brown in that mix makes sure the rusty parts don't shine too much aswell... Hope it helps 
|
|
| Author: | Queen Berúthiel [ Wed Sep 15, 2010 2:07 pm ] |
| Post subject: | Re: Painting Goblin Armour |
Check my goblins in the paint me an army thread. I first drybrush them with tin bitz. Then i drybrush them with a fifty fifty mix of tin bitz and chainmail. Then i drybrush them with blazing orange. Hope it helps p.s welcome to the OR
|
|
| Author: | General Elessar [ Wed Sep 15, 2010 3:50 pm ] |
| Post subject: | Re: Painting Goblin Armour |
For mine I simply painted the armour Tin Blitz and then drybrushed it Chaos Black. Not the best finish but very fast which is useful when you're painting a horde of Goblins. |
|
| Author: | DeepThought [ Wed Sep 15, 2010 4:08 pm ] |
| Post subject: | Re: Painting Goblin Armour |
Thanks for all the ideas I tried them out on a few old random models I base coated but didnt finish, I liked the finish from TheBucklandBrewer method but thought it looked a little too brown. I decided to replace the brown with chaos black giving me a nice dark look but not shiny like when I used the ink on its own. Thanks for the help and its nice to see such a friendly community 
|
|
| Author: | TheEggman [ Wed Sep 15, 2010 9:02 pm ] |
| Post subject: | Re: Painting Goblin Armour |
I do model tanks as well, and when painting the tracks, you can use the following method for a more rusty effect than starting with tin bitz. Start with a black undercoat, then drybrush it with your rust colour, which should be flat, not metallic. then drybrush it in silver. this is a techniwque for getting a more weathered effect, and you can, if you have a lot of time, go into a lot more detail - using oil paints, rust powders, or pigment powers... but that is a bit much for wargaming. When I do orcs, one thing I like to do is mix some rust powder (just find something rusty and rub it with steel wool to get a powder) together with some varnish and then paint it on in a few of the crevices and as streaks of rust. If you do this, be careful not to do too much, less is more. |
|
| Author: | Gandlaf the Grey [ Thu Sep 16, 2010 9:49 am ] |
| Post subject: | Re: Painting Goblin Armour |
You have a few options but to throw another into the mix. Basecoat with a mix of Bestial Brown and Boltgun Metal and increase the Boltgun Metal to pure. The very edges and highest points highlight sparsly with Mithril Silver and complete with a Badab Black Devlan Mud wash to create the shading |
|
| Author: | Angularity [ Thu Sep 16, 2010 1:43 pm ] |
| Post subject: | Re: Painting Goblin Armour |
Queen Berúthiel wrote: Check my goblins in the paint me an army thread. I first drybrush them with tin bitz. Then i drybrush them with a fifty fifty mix of tin bitz and chainmail. Then i drybrush them with blazing orange. Hope it helps p.s welcome to the OR I thought that this method was ridiculous (after all, surely the rust would be on the parts that are NOT picked up by dry-brushing, i.e. those parts most likely to be rubbed rustless); however, I tried it and it looks great. So, if it looks right, it is right
|
|
| Author: | rikker [ Sun Sep 19, 2010 7:08 pm ] |
| Post subject: | Re: Painting Goblin Armour |
I always give my goblin armour a thin line of boltgun metal, and than i heavily drybrush the armour with scorched brown. And it works fine. |
|
| Author: | isengardlord [ Wed Sep 22, 2010 6:16 am ] |
| Post subject: | Re: Painting Goblin Armour |
i paint them first tin bitz then drybrush with boltun metal at last a wash of devalen mod  
|
|
| Author: | BLehti [ Tue Oct 05, 2010 8:18 pm ] |
| Post subject: | Re: Painting Goblin Armour |
I know you have a bunch already but heres one more for good measure  I start mine with a heavy Drybrush of Tin Bitz (Over a Black undercoat). I then do a slightly lighter drybrush with a 50/50 mix of Tin Bitz & Chainmail followed by a very light drybrush of just Chainmail. I finish it off with a wash of Gryphonne Sepia. I have no pics right now but I think they look rad! Cheers! |
|
| Author: | Shadowswarm [ Tue Oct 05, 2010 10:15 pm ] |
| Post subject: | Re: Painting Goblin Armour |
i play gobs in wotr, and alot of them are unpainted, if you guys could get some pics up then it would be alot easier to understand Cheers |
|
| Author: | Elros of Numenor [ Wed Dec 08, 2010 7:14 am ] |
| Post subject: | Re: Painting Goblin Armour |
Another one!!!! Heavily drybrush 50/50 Bestial brown and blazing orange first, then lighter drybrush boltgun metal on top of that. then black wash and its done
|
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|