The One Ring
https://wap.one-ring.co.uk/

Forgeworld to produce LOTR/Hobbit miniatures and terrain?
https://wap.one-ring.co.uk/viewtopic.php?f=1&t=27407		 Page 1 of 4
Author:  Pindergorn [ Sat Jan 11, 2014 12:43 am ]
Post subject:  Forgeworld to produce LOTR/Hobbit miniatures and terrain?
From Dakka Dakka.

http://www.dakkadakka.com/dakkaforum/posts/list/572628.page

necronspurs2012 wrote:
Forge world is being rumoured to start doing hobbit/lotr kits. This jas come around with GW not being able to produce a smaug model due to their agreement with new line cinema that all models must be of right likelyness and scale. Other models rumoured to be done are the necromancer, sauron and even terrain.

Note this is just rumours at the moment.
Author:  IntLemon [ Sat Jan 11, 2014 1:20 am ]
Post subject:  Re: Forgeworld to produce LOTR/Hobbit miniatures and terrain
Sauron?! Awwww yeeeaaahh.
Author:  GothmogtheWerewolf [ Sat Jan 11, 2014 2:29 am ]
Post subject:  Re: Forgeworld to produce LOTR/Hobbit miniatures and terrain
What?!

Forgeworld Smaug.

NNNNNNOOOOOOOOOOOOOOOOOOOOO!!! £150 price tag here we come. Ridiculous 750pt model here we come.
Author:  army-of-the-dom [ Sat Jan 11, 2014 2:42 am ]
Post subject:  Re: Forgeworld to produce LOTR/Hobbit miniatures and terrain
couldnt agree more ^^^ just think this is pure speculation with imho nothing serious to it, games workshop have been put in doubt over things such as mumaks, balrog and other monsters and have had the models made to great quality, game size scale and a fair price tag (not starting ww3)
Author:  Draugluin [ Sat Jan 11, 2014 4:52 am ]
Post subject:  Re: Forgeworld to produce LOTR/Hobbit miniatures and terrain
If this is true, it's better than not getting a Smaug model at all.
Author:  Harfoot [ Sat Jan 11, 2014 7:47 am ]
Post subject:  Re: Forgeworld to produce LOTR/Hobbit miniatures and terrain
If it is true we can expect to see some amazing models coming out. I hope so, but also want to see Smaug released in plastic.
Author:  SouthernDunedain [ Sat Jan 11, 2014 8:16 am ]
Post subject:  Re: Forgeworld to produce LOTR/Hobbit miniatures and terrain
If smaug is forgeworld, it'll be the same price as a thunderhawk/ manta. So £350+

GW smaug I'll buy
FW smaug I won't buy.
Author:  Dead Marsh Spectre [ Sat Jan 11, 2014 3:54 pm ]
Post subject:  Re: Forgeworld to produce LOTR/Hobbit miniatures and terrain
bring it on....
Author:  the big goblin [ Sat Jan 11, 2014 4:19 pm ]
Post subject:  Re: Forgeworld to produce LOTR/Hobbit miniatures and terrain
Please dont do a Fw smaug.
Author:  Da Krimson Barun [ Sat Jan 11, 2014 4:41 pm ]
Post subject:  Re: Forgeworld to produce LOTR/Hobbit miniatures and terrain
Luckily Necronspurs2012 is a unreliable rumor mongerer.
Author:  Sticky Fingersss [ Sun Jan 12, 2014 2:02 am ]
Post subject:  Re: Forgeworld to produce LOTR/Hobbit miniatures and terrain
I'd much rather have a FW Smaug that no Smaug at all.
Author:  Red Corsairs [ Sun Jan 12, 2014 12:08 pm ]
Post subject:  Re: Forgeworld to produce LOTR/Hobbit miniatures and terrain
I'm more than up for a FW Smaug. Storm Giants would be welcome.
Author:  Creaky [ Sun Jan 12, 2014 12:42 pm ]
Post subject:  Re: Forgeworld to produce LOTR/Hobbit miniatures and terrain
Hmmm.


If this rumour is true, then GW is using FW to get passed the other rumour of WB not allowing them to reduce Smaug's scale. They can't produce a model of that size, but FW can. But... There's a reason they would have wanted to produce a smaller smaug in the first place. A two/three foot long smaug is no gaming piece - realistically.

I'm sure some of the very highly talented painters on this forum and wider community could do some amazing (AMAZING) things with that. But three things would mean that I wouldn't be willing to pick this up: size (I have tight space as it is without trying to find a home for a dragon that's longer than my dog), gaming (i don't buy to paint, mainly because of reason 3), and painting (i'm not that great - certainly not good enough to do justice to a smaug of that scale and price).

Terrain though, sure, that sounds great. Maybe they could re-issue the old fortress sets they did for helms deep and Minas Tirith. I'd grab a necromancer, too, depending on practicality.
Author:  Dorthonion [ Sun Jan 12, 2014 1:37 pm ]
Post subject:  Re: Forgeworld to produce LOTR/Hobbit miniatures and terrain
Would Forgeworld be capable of making Smaug? - I would say yes.
Could it ever be used as a gaming piece? - unlikely due to the likely size, weight and sheer awkwardess of the beast (ease of damage occurring). Note I said unlikely, not impossible, as there are some loonies who might go for it :oops:
What price? Pure speculation - depends on size, licensing surcharge, low volume production run so very high overheads per model. The bottom end, all in resin for an 18-24 inch dragon could be £250 and upwards. I would add £100 for every 6 inches bigger than that as a low-end guideline. I am basing this guessimate on the prices of other large pieces such as titans, and most interestingly, the Tyranid Harridan which comes closest in shape and size to the lower end of the scale (at £235).
Would I go for it? Hmmm. To be honest, if it was a really good representation of the movie Smaug and big enough to eat mumakil for breakfast then I would be very, very tempted.
But also being honest, I would prefer a good plastic kit.
Author:  StewardofGondor [ Sun Jan 12, 2014 3:07 pm ]
Post subject:  Re: Forgeworld to produce LOTR/Hobbit miniatures and terrain
Look at the price of Tau Manta to have an idea, if the rumor is true I expect 1000£ + being of the same lenght and bulkier
( Tau manta=960 £ )
Author:  LordoftheBrownRing [ Sun Jan 12, 2014 10:16 pm ]
Post subject:  Re: Forgeworld to produce LOTR/Hobbit miniatures and terrain
GothmogtheWerewolf wrote:
What?!

Forgeworld Smaug.

NNNNNNOOOOOOOOOOOOOOOOOOOOO!!! £150 price tag here we come. Ridiculous 750pt model here we come.


Um.....seriously? You dont think that games workshop with the price of 100$ for a Mumak wouldnt already release a Smaug thats the same price? Look at the % in increases already.

As for the pt value.....Smaug stats cant be made up by Forgeworld anyway. GW can still put out stats for him and let other ppl build the model.


As for the time being, why worry if they make one. GW clearly isnt doing it anyway. They're late. Let someone else......
Author:  GothmogtheWerewolf [ Sun Jan 12, 2014 10:45 pm ]
Post subject:  Re: Forgeworld to produce LOTR/Hobbit miniatures and terrain
LordoftheBrownRing wrote:
GothmogtheWerewolf wrote:
What?!

Forgeworld Smaug.

NNNNNNOOOOOOOOOOOOOOOOOOOOO!!! £150 price tag here we come. Ridiculous 750pt model here we come.


Um.....seriously? You dont think that games workshop with the price of 100$ for a Mumak wouldnt already release a Smaug thats the same price? Look at the % in increases already.

As for the pt value.....Smaug stats cant be made up by Forgeworld anyway. GW can still put out stats for him and let other ppl build the model.


As for the time being, why worry if they make one. GW clearly isnt doing it anyway. They're late. Let someone else......

Erm... £ is not the same as $

A Mumak only costs £60. That is a lot less than £150. Besides it would be more like £250 or £350 anyway.

And a 750pt model as in size-wise, if Smaug was a little smaller, his profile would be a little weaker, say 500pts which is still viable.
Author:  cuchulain84 [ Sun Jan 12, 2014 10:56 pm ]
Post subject:  Re: Forgeworld to produce LOTR/Hobbit miniatures and terrain
GothmogtheWerewolf wrote:
LordoftheBrownRing wrote:
GothmogtheWerewolf wrote:
What?!

Forgeworld Smaug.

NNNNNNOOOOOOOOOOOOOOOOOOOOO!!! £150 price tag here we come. Ridiculous 750pt model here we come.


Um.....seriously? You dont think that games workshop with the price of 100$ for a Mumak wouldnt already release a Smaug thats the same price? Look at the % in increases already.

As for the pt value.....Smaug stats cant be made up by Forgeworld anyway. GW can still put out stats for him and let other ppl build the model.


As for the time being, why worry if they make one. GW clearly isnt doing it anyway. They're late. Let someone else......

Erm... £ is not the same as $

A Mumak only costs £60. That is a lot less than £150. Besides it would be more like £250 or £350 anyway.

And a 750pt model as in size-wise, if Smaug was a little smaller, his profile would be a little weaker, say 500pts which is still viable.


500pt Smaug would be lame. He can lay waste to entire civilisations with ease.
Author:  GothmogtheWerewolf [ Sun Jan 12, 2014 10:57 pm ]
Post subject:  Re: Forgeworld to produce LOTR/Hobbit miniatures and terrain
@Cuchulain84, Yes, but Sauron is even more powerful and still under 500pts. It's viable.
Author:  cuchulain84 [ Sun Jan 12, 2014 11:02 pm ]
Post subject:  Re: Forgeworld to produce LOTR/Hobbit miniatures and terrain
GothmogtheWerewolf wrote:
@Cuchulain84, Yes, but Sauron is even more powerful and still under 500pts. It's viable.


Sauron needs an army. Smaug eats armies.
Page 1 of 4 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/