| The One Ring http://wap.one-ring.co.uk/ |
|
| Highlights. http://wap.one-ring.co.uk/viewtopic.php?f=100&t=23376 |
Page 1 of 1 |
| Author: | Stormcrow [ Fri Jul 06, 2012 9:34 pm ] |
| Post subject: | Highlights. |
Hi, I'v been collecting and painting for just over a year now and have improved my painting skills yet I seem to struggle with highlights. So far my models are mainly washed and drybrushed to create depth. They look ok but I cant get the same smooth clean effect that can be achived by using highlights. I have tried highlighting a few times but it always looks to harsh, thick blobby lines on my models, rather than neat and fluid. As i say, drybrushing looks ok but I would like to improve my skills. Any advice? Thanks. |
|
| Author: | SidTheSloth [ Fri Jul 06, 2012 9:49 pm ] |
| Post subject: | Re: Highlights. |
Perhaps try thinning the paint down a bit with water, i find this helps to give a smoother transition, this also helps to stop some of the thick blobyness that you talked about when i highlight, I also find it helpful to drybrush a lighter colour on first to help me see where the bits to highlight are. I hope this helps good luck 
|
|
| Author: | Dead Marsh Spectre [ Fri Jul 06, 2012 10:15 pm ] |
| Post subject: | Re: Highlights. |
Stormcrow - SidtheSloths advice there is spot on!!! paint on the base colour of the cloak or whatever you are painting then add a little white or bleached bone to the base mix with a drop of water and when highlighting drag the brush towards the area you want the lighter colour to be strongest. Be careful not to get too much paint on the brush as it will run into the recess's of your model. You can repeat this stage as many times as you like until you are happy with the result. To blend even further you can water down the washes and do a watered down wash over the entire highlighted cloak which gives the recess's further depth. Again as Sid says do a light drybrush of the lighter colour before adding water to help you see where the highlights would be, the more you do it the less you will need to do the drybrush stage as you will know straight off where to highlight. Good luck! |
|
| Author: | SidTheSloth [ Fri Jul 06, 2012 10:23 pm ] |
| Post subject: | Re: Highlights. |
Thanks DMS IMO bleached bone is better to add as skull white can leave it looking a bit washed out, but skull white also works well for different things |
|
| Author: | Stormcrow [ Fri Jul 06, 2012 10:26 pm ] |
| Post subject: | Re: Highlights. |
Thanks guYs some good tips there. I think ill try watering down my paints more, it may take a few more layers but I guess its worth it until i get a bit better at it. Will also drybrush the area first too to help show detail. Thanks again. |
|
| Author: | Ring_of_Gyges [ Fri Jul 06, 2012 11:40 pm ] |
| Post subject: | Re: Highlights. |
Here's an example of a cloak I did.  Here's how it was done:  The whole cloak was covered in color A, then a good wide chunk of the raised sections were covered in B, then the top most ridge in C. I don't remember the names off hand (I'll have a look later on) but all three are straight out of the pot GW colors. A is easy, just cover everything. To get a nice straight line for the edge of B, start the brush where you want it and apply the line in a single motion, that way you get a straight line. Making one smooth line may result in it not going exactly where you planned, but it doesn't matter too much because the boundaries between the colors are pretty arbitrary. C is a lot like drybrushing, you're just applying a line right along the ridge so if you align your brush perpendicular to the ridge and drift down the brush will hit the ridge before anything else and leave a bright line down the middle. I you can't find three colors that work well together you can make your own. I do it by taking the darkest color, 2 parts of the dark plus 1 part bleached bone, and 1 part dark plus 2 parts bleached bone. That's where the stripes on Erkenbrand came from... 
|
|
| Author: | Stormcrow [ Sun Jul 08, 2012 2:32 pm ] |
| Post subject: | Re: Highlights. |
Wow thanks for that. The highlights look great and the guide really helps. Thanks again. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|